AudioControl EPIC2000 EPIC Series mono subwoofer amplifier (2000 watts RMS x 1 at 1 ohm)

Compact, power-packed, and affordable

AudioControl's EPIC2000 amplifier offers you more power per square inch and watts per dollar than most other car amplifiers on the market today. This mono subwoofer amp uses Class D technology to punch above its weight, sending out up to 2000 watts and make your sub sing out loud and clear with minimal stress to your car's electrical system. All this power is packed into a rugged, compact amp that'll fit in a lot of different spaces in a lot of different vehicles.

Bass system power, control, and tuning

Lovers of loud bass can strap two EPIC2000s together to create a 4000-watt subwoofer system. The amplifier was designed specifically for subwoofers as it features low-pass and subsonic crossover filters to eliminate unwanted high- and ultra-low-frequencies from the mix, a tunable bass boost for extra oomph, and a wired remote control so you can fiddle with the bass volume from your front seat. The amp has preamp inputs only, so you'll need a line output converter or a similar device like an EPICENTER to connect to a factory system if you're not using an aftermarket radio with RCA outputs.

Made for THE EPICENTER®

For ultimate bass sound and connectivity, the EPIC2000 includes a power and ground connection harness that'll work with AudioControl's EPICENTER bass enhancers, as well as with their other line output converters that take factory speaker-level signals and make them suitable for the amp's input.

Installation Note: This amplifier's power consumption is beyond the capacity of most automotive electrical systems. To power this amp, your vehicle may require an electrical upgrade that could include a high-output alternator, a Big 3 battery wiring upgrade, and a second battery.

Product highlights:

• mono subwoofer amplifier
  • 800 watts RMS x 1 at 4 ohms
  • 1400 watts RMS x 1 at 2 ohms
  • 2000 watts RMS x 1 at 1 ohm
• bridgeable with a second EPIC2000 to produce 4000 watts RMS x 1 at 2 ohms
• Class D amp technology
  • frequency response: 10-190 Hz
• variable low-pass filter (40-180 Hz, 12 dB/octave)
• variable subsonic filter (Off-50 Hz, 12 dB/octave)
• EPICBoost™ Variable Frequency Bass Boost (0-12 dB at 30-80 Hz)

More info:

• ACR-E wired remote control included
• power harness for accessory preamp included
  • compatible with AudioControl line output converters and Epicenter bass enhancers
  • pre-installed 1A fuse included for accessory power connection
• preamp inputs only
• wiring, fuse, and hardware not included with amplifier:
  • 1/0-gauge power and ground leads and a 200A fuse recommended
• dimensions: 12.88"W x 2.01"H x 6.09"D
• warranty: 1 year