AudioControl ACX-300.2 2-channel powersports/marine amplifier (75 watts RMS x 2)
AudioControl ACX-300.2 2-channel powersports/marine amplifier (75 watts RMS x 2)
Waterproof power
One of the main problems with some powersports amplifiers is that the amp won't survive a thorough washing of your vehicle after a good day of fun in the dirt and mud. AudioControl's ACX-300.2 two-channel amplifier carries an IPX6 waterproof rating, which means you can clean it off with a powerful water jet spray and it won't hurt a thing. Construction details include conformal circuit board coatings, insulated gaskets for the control panel cover, plus waterproof input, output, and power connections.
Play your music loud and clear
The ACX-300.2 can produce 75 watts RMS per channel — enough to hear your music clearly over the sounds of wind and motors. Want to power a subwoofer? This amp can also operate in one-channel mode to power a sub with 300 watts RMS.
Some practical features
This tiny, hand-size amp will fit almost anywhere in almost any kind of vehicle, and it features high-level inputs with signal-sensing turn-on, so it'll work with almost any stereo system. To simplify setup, "Maximized" LEDs indicate when the amplifier's gain is set for optimum performance.
Product highlights:
- 2-channel powersports/marine amplifier
- 75 watts RMS x 2 at 4 ohms
- 150 watts RMS x 2 at 2 ohms
- 300 watts RMS x 1 bridged at 4 ohms
- Class D amp technology
- selectable high-pass filter (bypass, 80, 120 Hz at 12 dB/octave)
More info:
- IPX6 rated chassis will withstand power washing
- waterproof input, output, and power connections
- preamp and speaker-level inputs
- GTO™ (Great Turn On) signal-sensing turn-on with speaker-level input
- wiring, fuse, and hardware not included with amplifier
- 8-gauge power and ground leads and a 30-amp fuse recommended
- dimensions: 10.7"W x 2.38"H x 3.87"D
- warranty: 5 years
What's in the box:
- AudioControl ACX-300.2 owner's manual
- 2-Channel amplifier (attached 12" power/ground/input/output harnesses)
- 7" Power & ground harness (10 ga.)
- 7" Speaker output harness
- Power & ground harness (empty)
- 2 Crimp-on terminals for power & ground harness
- Harness locking pin
- 2 Rubber grommets
- Four 3/4" screws
- Quickstart guide
Product features
Product features
Materials and care
Materials and care
Merchandising tips
Merchandising tips
Share
