Alpine PSS-23WRA2 Direct-fit powered audio upgrade package (select 2018-up Jeep Wrangler Unlimited JL)
Alpine PSS-23WRA2 Direct-fit powered audio upgrade package (select 2018-up Jeep Wrangler Unlimited JL)
Your Jeep JL can sound as good as it looks
Your Jeep Wrangler Unlimited JL is adventure central. It goes everywhere you ask of it, but I've gotta ask... does it sound as good as it could? Alpine has a solution with the Restyle PSS-23WRA2 audio upgrade package. It'll add the audio performance that's missing in your Jeep's factory system.
What you'll get
When the top is down and the wind's blowing, you can lose more than just your hat. Without a sub, your music's low end can sound less defined and the high-frequency detail can get lost with the whoosh of wind noise and the rumble of the road. This system adds Alpine's PWE-S8 powered 8" sub for some serious bass reinforcement and a pair of impressive SPV-10TW-WRA 1" Teteron dome tweeters to bring out all the high-frequency details. Of course, you'll need power for all your speakers, which is where the KTP-445U Power Pack comes in, supplying 45 watts RMS to your factory speakers and new tweeters.
Best of all, installation is simplified thanks to the included Wrangler-specific brackets, adapters, and wiring harnesses.
Product highlights:
- compatible with select 2018-up Jeep Wrangler Unlimited JL vehicles
- designed for Wranglers without the premium Alpine system
- package includes:
- two 1" Teteron dome tweeters and mounting adapters;
- KTP-445U amplifier: 45 watts RMS x 4 at 4 ohms;
- PWE-S8 powered sub: 8" sub with 120-watt amp;
- T-harness for connecting to Jeep radio (works with aftermarket radios too)
- mounting hardware and connectors
- warranty: 3 years
What's in the box:
- Alpine PSS-23WRA2 owner's manual
- KTP-445U amplifier
- PWE-S8 powered subwoofer (both pre-attached to vehicle mounting bracket)
- 7' Power & signal harness
- 12' Loomed power wire w/ inline 20A fuse
- 52-Pin T-harness
- Four 10" speaker to RCA harnesses
- Two SPV-Series tweeters with attached 8" wires
- 2 Crossovers with attached 4" input & output wires
- Remote bass-level control w/ attached 16' cable
- 3" Strip of hook-and-loop fastener
- Ten 6" wire-ties
- 1/2" Self-tapping screw
- Star-washer
- 2 Alpine logo badges
- Installation guide
- Warranty information
- Alpine Tech Support information
Couldn't load pickup availability
Product features
Product features
Materials and care
Materials and care
Merchandising tips
Merchandising tips
Share










